VAG COM

VAG COM

Category: VAG diagnostic tool - VW, Audi, Seat and Skoda
Version: VAG COM Full version
Latest : VAG COM V16

VAG COM Function

• Is fully compatible with all VW, Audi, Seat and Skoda models through the current model year, including models using a direct CAN connection for diagnostics*.
• Has a database of more than 14000 fault-codes and measuring-block texts.
• Can use the new 7-Digit PIN/SKC codes to match new keys in all immobilizer equipped VW/Audi/Seat/Skoda models.
• Allows you to view,  log, and graph 3 groups of Measuring Blocks at once
• Can access all control modules which require proprietary VAG modes running the KWP-2000 protocols (2001+ Teves Mk.60 ABS, numerous 2002+ modules), KWP6000 (CAN) and/or KWP7000 (UDS)*.
• Can display critical timing information on TDI engines in graphic form

VAG COM Compatible Vehicles

Compatible Vehicles: Volkswagen, Audi, skoda, seat.

More Compatible Vehicles info : https://www.ross-tech.com/vag-com/issues.html

VAG COM Revision History, Major Releases:

Release 111.11
Release 11.10
Release 11.8
Release 11.3

Release 10.6.4 posted 18 Apr. 2011

• Label File Name and additional Information now shown in Control Module Identification
• New Firmware for HEX+CAN interfaces
• Improved control module documentation (Label and .ROD files)

Release 10.6.3 posted 7 Dec. 2010

• Support for new Gateways installed in many PQ25 and PQ35 models since 08.11.2010
• Improved control module documentation (Label and .ROD files)

Release 10.6.2 posted 23 Nov. 2010

• Improved handling of Subsystems ("Slave Modules") in UDS/ODX
• Support for Audi A1 (8X Chassis)
• Improved support for 2011 Jetta (chassis code AJ)
• Improved support for vehicle identification in those instances where a VIN is not available.
• Improved control module documentation (Label and .ROD files)

Release 10.6.1 posted 4 Sept. 2010

• Support for Subsystems ("Slave Modules") in UDS/ODX
• Support for Audi A1 (8X Chassis)
• Improved display of fault codes on UDS/ODX modules
• New Firmware for HEX+CAN and Micro-CAN interfaces
• Improved control module documentation (Label and .ROD files)

Release 10.6.0 posted 30 June 2010

• Supports Basic Settings on control modules using the new UDS/ODX/ASAM protocol.
• Adds new UDS addresses and updated ODX data for 2011 models.
• Support for new addresses in latest cars
• Improved Readiness Screens with additional info
• Full 64-bit support on systems which can use it.
• New CODES file, now with over 14,000 fault code and measuring value texts.
• Updated Label files; improved documentation for new and existing models.
• Includes everything introduced in Beta versions versions 912, 10.3, and 10.4.

Release 908 posted 30 August 2009

• Supports Measuring Values, Output Tests, and Adaptations on control modules using the new UDS/ODX/ASAM protocol.
• Adds new UDS addresses and updated ODX data for 2010 models.
• Includes support for TP1.6 protocol which is required for the 6J Ibiza and speeds up access on many modules in other models.
• The Select Control Module screen now shows "Installed Modules" rather than "Common Modules" if the car being worked on is new enough to have a proper CAN Gateway.
• Modified SRI Screen to show more info and force user to select a job before proceeding.
• Adds drop-box function selection in Basic Settings and Adaptation.
• Reads Mileage stored in many EDC16 ECUs.
• New CODES file, now with over 13,000 fault code and measuring value texts.
• New USB drivers for enhanced PC compatibility and stability.
• New firmware for HEX interfaces required for compatibility with 6J Ibiza
• Updated Label files; better documentation for new and existing models.
• Too many other improvements to list here. For details see the Beta 812, 904, and 907 pages.

Release 805 posted 29 May 2008

• New Product Name: VAG-COM is now VCDS^®.
• Full support for control modules using the new "Service 22" identification methods.
• Support for control modules using the new UDS/ODX/ASAM protocol. The following functions are supported: Control Module ID (including Advanced ID), Coding, Security Access, and Fault Codes.
• New Session Log capabilities.
• Support for Generic OBD-II Mode 10.
• Support for vehicles with dual ECUs, or example the RS4 and W12 engines. Both ECUs are accessible simultaneously via address 31 for Basic Settings such as TBA.
• Revised Adaptation screen to support the much longer Long Adaptations now appearing in some control modules.
• Revised Advanced ID screen for increased flexibility handling the various data items appearing in the latest control modules.
• New internal Gateway Coding Assistant (required for Audi B8 platform cars).
• Adds support for latest new model cars such as Audi Q5, Passat CC, new Skoda Superb, VW Sirocco and Passat CC.
• Much improved documentation (Label Files) for many older cars.
• For more details, see our Beta 711 and Beta 804 pages.
• This version is no longer supported. Users should update to the current version.

Release 704 posted 5 April 2007

• Fully compatible with Windows Vista
• Automatic Updates
• New Service Reminder function
• Support for Guided Readiness Scripts.
• Optical Bus Diagnosis
• Battery Coding Assistant
• Ability to save and retrieve Advanced Measuring Block configurations
• Enhanced compatibility with latest model cars.
• New universal Installer with USB driver pre-installation.
• For more details, see our Beta 702 page.
• This version is no longer supported. Users should update to the current version.

Release 607 posted 14 July 2006

• New Advanced Measuring Blocks function
• Freeze Frame Data shown in-line with Fault Codes and in Auto-Scan
• Fault codes now indicate whether a MIL is on.
• Automatic Detection of installed modules (CAN cars only) in Auto Scan.
• Auto-Scan includes Hardware Part Numbers on those modules where it's available separately.
• New Supported Codes function.
• New EDC15+ Mileage function (odometer reality-check).
• New Acceleration Measurement function (performance calculator)
• Regular and Long Coding screens combined into one.
• New VAG-Scope version 1.9 compatible with Advanced Measuring Blocks.
• New TDI-Graph version 1.4 compatible with V6 TDIs.
• Updated Label Files
• Generic OBD-II now includes Info Types 08 and 0A in Mode 9.
• New more informative Installer.
• Support for new Micro-CAN interfaces.
• Numerous other fixes and enhancements introduced in Beta 606.
• This version is no longer supported. Users should update to the current version.

Release 512 posted 24 December 2005

• Supports Selective Output Tests
• Supports Coding of Slave Modules
• Adds control module mapping functions.
• Support/intergration of Long Coding Helper applications such as Niels Ezerman's excellent
  LCode.exe (included with this distribution of VAG-COM):
• Revised Options Screen with parameters grouped more logically.
• Supports alphanumeric Long Adaptations
• Revised and expanded Label Files to document many more systems.
  As usual, big thanks and lots of credit are owed to Sebastian and Michael.
• Revised and expanded CODES file. Now over 9000 codes -- completely up to date.
• Numerous other fixes and enhancements introduced in Beta Versions 505, 506, and 510.
• This version is no longer supported. Users should update to the current version.

Release 504 posted 05 April 2005

• Compatible with all the latest car models, engines, & transmissions.
• Revised and expanded Label Files to document many more systems.
  A big thanks and lots of credit are owed to Sebastian and Michael.
• Revised and expanded CODES file for improved clarity and new codes for 2006 models.
• Incorporates all new features including generic OBD-II functionality introduced in Beta 500.x.
• Adds generic OBD-II capabilities
• This version is no longer supported. Users should update to the current version.

Release 409 posted 03 October 2004

• Clear All DTCs functions
• Support for Transport Mode ON/OFF for Golf-5 Platform and Audi A8(4E) chassis cars.
• Fixed incompatibility with older Sharan (7M platform) 09 modules.
• CODES file enhanced with texts for 2005 models.
• Ability to decode Readiness bits for modern TDI engines
• Support for selectable window sizes for higher-resolution laptops.
• New Label File redirection methods
• New Version 1.7 VAG-Scope
• New Version 1.3E of TDI-Graph
• SAVE CODES button on Fault Codes Screen.
• This version is supported only for customers who are using obsolete "dumb" or third-party interfaces.

Release 404 posted 29 April 2004

• Support for HEX+CAN interfaces and all 2005 Model VW/Audi/Seat/Skoda passenger vehicles including those requiring a direct CAN connection for diagnostics with an appropriate CAN-capable interface.
• Includes all additional enhancements introduced in Beta versions 401.2, 402.3, and 403.1.
• Adds support for the KEY-COM and KEY-USB Interfaces.
• Adds enhanced labels for Measuring Blocks, Adaptation Channels, and Recode screens.
• Adds suggested coding values for Airbag controllers.
• This version is no longer supported. Users should update to a newer version.

Release 311 posted 16 November 2003

• Support for all 2004 Model VW/Audi/Seat/Skoda passenger vehicles using the K-Line for diagnostics.
• "Turbo" mode in Measuring Blocks for ME7 and EDC16 ECUs using KWP-2000 protocol for diagnostics. Up to 34 samples per second. Requires HEX-COM or HEX-USB interface.
• Enhanced keyboard support throughout VAG-COM
• Browse function when opening Log files.
• Ability to Log Measuring Block Group 000.
• New "Tabbed" Select Control Module Interface with buttons for all control module addresses currently supported by the VAS-5051/5052.
• Enhanced Measuring Block formulas. Adds support for a number of new data-types, and fixes all known bugs in formulas. All formulas have been verified against our VAS-5052 with latest software.
• Adds Freeze Frame data for Fault Codes on control modules using the KWP-2000 protocols.
• Adds Advanced ID function for control modules using the KWP-2000 Protocols.
• Assorted Bug Fixes.
• This version is no longer supported. Users should update to a newer version.
• Adds Support for the HEX-USB Interface, including updated USB Drivers compatible with both the TWIN-USB and the HEX-USB.
• Completely rewritten KWP-2000 routines. Compatible with numerous new control modules found in Touareg, Phaeton and others including EDC-16 and MED-9.
• Adds Output Test (03), Adaptation (10) and Access Authorization (16) for control modules using KWP-2000.
• This version is supported only for customers who are using obsolete "dumb" or third-party interfaces based on opto-isolators.

Release 303 posted 24 March 2003

• Adds the long awaited Auto-Scan ("00 Scan") feature.
• Adds support for the TDI Timing Checker "Plug-In"
• Tremendously expanded and completely revised CODES file. Now over 7000 codes, including codes for new models like the Touareg, Phaeton, NB Cabrio, etc.
• Includes new version (1.3a) of VAG-Scope which supports graphing of 10 fields found in
  Group 000.
• Numerous small enhancements
• Fixes for some "glitches" in HEX-COM and TWIN-USB support.
• Adds support for new HEX-COM and TWIN-USB interfaces.
• Adds support for VAG-Scope graphing "Plug-In"
• This version is no longer supported. Users should update to a newer version.

Release 208 posted 12 August 2002

• Adds Basic Settings, Login, Recode, and Readiness for those control modules that use the KWP-2000 protocols in 2001 and newer (mostly 2002+) cars.
• Adds Control Module Finder.
• Adds a 256 Color Mode for old PC's on which previous versions of VAG-COM didn't look very nice.
• Numerous small tweaks and bug-fixes.
• This version is no longer supported. Users should update to a newer version.

Beta 0.81 posted 14 March 2002

• New Self-Installing -- no need to manually create folders or shortcuts.
• Supports 7-Digit PINs (Secret Key Codes)
• Supports control modules using KWP-2000 protocol -- Shows Controller Info, Reads and Clears Fault Codes, shows & allows logging of Measuring Blocks. Other functions will be added soon.
• Incorporates numerous other small improvements previously available in Alpha 0.80 and Alpha 0.81.
• Additional Label Files and Codes
• Added warning pop-up for the Airbag Controller Issue.
• This version is no longer supported. Users should update to a newer version.

Beta 0.78 posted 08 July 2001

• Adds Data Logging
• Adds Print Codes from the Fault Code Screen
• Fixes a rarely occurring bug causing some fault codes not to be shown (only when there are a large number of them)
• Lots of new Label Files, a few new Codes.
• Added De-Activate button to facilitate license transfers
• This version is no longer supported. Users should update to a newer version.

Beta 0.75 posted 18 Mar 2001

• Huge CODES file update. Over 3400 codes!
• Adds the ability to view 3 Measuring Block Groups simultaneously.
• Adds support for user-supplied Measuring Block Labels
• Adds complete support for "hybrid" measuring block data-type common in Digfant-3 ECUs and AG4 Transmissions.
• May work with some USB<->RS232 adapters, but this is not officially supported. If it works for you, fine. If it's "flaky", try a PC with a "real" port!
• This version is no longer supported. Users should update to a newer version.

Beta 0.71 posted 06 Feb 2001

• Adds OBD-II Compatibility Test
• Adds support for Magnetti-Marelli ECUs common on South American VWs.
• This version is no longer supported. Users should update to a newer version.

Beta 0.70b posted 10 Jan 2001

• Adds Output Test, Single Reading, and View Readiness.
• Low-Level protocol drivers rewritten to include error detection and correction.
• Better support for non-optically isolated interface adapters
• Adds checksums to Serial Numbers and Activation Codes so typographical errors will be rejected.
• Various small bug fixes
• This version is no longer supported. Users should update to a newer version.

Beta 0.65 posted 30 Oct 2000

• Adds Measuring Blocks, Basic Settings, and Adaptation Functions.
• Improved Controller Initialization and Protocol Options.
• Runs as "Shareware" without Activation. Requires Activation Code for full functionality.
• Version 0.65 is not longer supported, users should update to a newer version.

Beta 0.50 / 0.50a Posted 16 May 2000

• Initial public "release". No longer supported. Users should update to a newer version.

VAG COM Software download

keyword : VAG COM , VAGCOM,VAG drivers,VAG k can,VAG can commander,download VAG COM,VAG COM manual,VAG dash COM,VAG COM freeware,VAG COM kkl,super VAG k can